# UDM Pro VLAN Configuration Status **Last Updated:** 2026-01-14 **Status:** ✅ **100% CONFIGURED** - ALL 19 VLANs Created! --- ## Current Configuration Status Based on UDM Pro web interface screenshots, **ALL VLANs from the plan are configured**: ### ✅ Complete VLAN List (All 19 Networks) | # | VLAN ID | Name | Subnet | Status | |---|---------|------|--------|--------| | 1 | 1 | Default | 192.168.0.0/24 | ✅ Configured | | 2 | 11 | MGMT-LAN | 192.168.11.0/24 | ✅ Configured | | 3 | 110 | BESU-VAL | 10.110.0.0/24 | ✅ Configured | | 4 | 111 | BESU-SEN | 10.111.0.0/24 | ✅ Configured | | 5 | 112 | BESU-RPC | 10.112.0.0/24 | ✅ Configured | | 6 | 120 | BLOCKSCOUT | 10.120.0.0/24 | ✅ Configured | | 7 | 121 | CACTI | 10.121.0.0/24 | ✅ Configured | | 8 | 130 | CCIP-OPS | 10.130.0.0/24 | ✅ Configured | | 9 | 132 | CCIP-COMMIT | 10.132.0.0/24 | ✅ Configured | | 10 | 133 | CCIP-EXEC | 10.133.0.0/24 | ✅ Configured | | 11 | 134 | CCIP-RMN | 10.134.0.0/24 | ✅ Configured | | 12 | 140 | FABRIC | 10.140.0.0/24 | ✅ Configured | | 13 | 141 | FIREFLY | 10.141.0.0/24 | ✅ Configured | | 14 | 150 | INDY | 10.150.0.0/24 | ✅ Configured | | 15 | 160 | SANKOFA-SVC | 10.160.0.0/22 | ✅ Configured | | 16 | 200 | PHX-SOV-SMOM | 10.200.0.0/20 | ✅ Configured | | 17 | 201 | PHX-SOV-ICCC | 10.201.0.0/20 | ✅ Configured | | 18 | 202 | PHX-SOV-DBIS | 10.202.0.0/24 | ✅ Configured ⚠️ | | 19 | 203 | PHX-SOV-AR | 10.203.0.0/20 | ✅ Configured | **Total Configured:** ✅ **19/19 Networks (100%)** **Note:** PHX-SOV-DBIS shows `/24` instead of `/20` as in the plan. This may be intentional or needs verification. --- ## Verification Steps ### Step 1: Check All Configured Networks 1. **Access UDM Pro:** - URL: https://192.168.0.1 - Navigate: Settings → Networks → Networks 2. **Review All Pages:** - Check page 2 (networks 11-20) - Verify which VLANs from the plan are already configured 3. **Document Missing VLANs:** - Compare configured VLANs with the plan - Note which ones still need to be created ### Step 2: Verify Network Settings For each configured VLAN, verify: 1. **Basic Settings:** - ✅ VLAN ID matches plan - ✅ Subnet matches plan - ✅ Gateway IP matches plan 2. **Zone Assignment:** - ✅ All VLANs should be in "Internal" zone - ✅ Verify: Settings → Networks → [VLAN] → Zone = Internal 3. **Network Isolation:** - ✅ "Isolate Network" should be **UNCHECKED** for all VLANs - ✅ This enables inter-VLAN routing 4. **DHCP Configuration:** - ✅ DHCP Server enabled (if needed) - ✅ DHCP range configured appropriately ### Step 3: Verify Zone Matrix 1. **Navigate:** Policy Engine → Zone Matrix 2. **Verify:** Internal → Internal = **Allow All** 3. **This enables inter-VLAN communication** --- ## Next Steps ### Immediate Actions 1. **✅ Verify All 19 Networks** - Check pages 2-3 of the network list - Document which VLANs are configured - Identify missing VLANs 2. **✅ Verify Network Isolation** - Ensure "Isolate Network" is unchecked for all VLANs - This is critical for inter-VLAN routing 3. **✅ Verify Zone Matrix** - Internal → Internal = Allow All - This enables inter-VLAN communication ### Short-term (This Week) 1. **Create Missing VLANs** - Create any VLANs not yet configured - Follow the plan: VLANs 134, 140, 141, 150, 160, 200-203 2. **Configure DHCP** - Set up DHCP ranges for each VLAN (if needed) - Or configure static IPs for production 3. **Test Inter-VLAN Routing** - From VLAN 11, test routing to other VLANs - Verify connectivity between VLANs ### Long-term (This Month) 1. **Configure Firewall Rules** - Management → Service VLANs - Service VLANs → Management - Sovereign tenant isolation 2. **Assign VMs/Containers to VLANs** - Migrate VMs/containers to appropriate VLANs - Test connectivity 3. **Document VLAN Assignments** - Document which services are on which VLANs - Update architecture documentation --- ## Configuration Checklist ### Network Configuration - [x] Default (VLAN 1) - ✅ Configured - [x] MGMT-LAN (VLAN 11) - ✅ Configured - [x] BESU-VAL (VLAN 110) - ✅ Configured - [x] BESU-SEN (VLAN 111) - ✅ Configured - [x] BESU-RPC (VLAN 112) - ✅ Configured - [x] BLOCKSCOUT (VLAN 120) - ✅ Configured - [x] CACTI (VLAN 121) - ✅ Configured - [x] CCIP-OPS (VLAN 130) - ✅ Configured - [x] CCIP-COMMIT (VLAN 132) - ✅ Configured - [x] CCIP-EXEC (VLAN 133) - ✅ Configured - [x] CCIP-RMN (VLAN 134) - ✅ Configured - [x] FABRIC (VLAN 140) - ✅ Configured - [x] FIREFLY (VLAN 141) - ✅ Configured - [x] INDY (VLAN 150) - ✅ Configured - [x] SANKOFA-SVC (VLAN 160) - ✅ Configured - [x] PHX-SOV-SMOM (VLAN 200) - ✅ Configured - [x] PHX-SOV-ICCC (VLAN 201) - ✅ Configured - [x] PHX-SOV-DBIS (VLAN 202) - ✅ Configured (⚠️ /24 instead of /20) - [x] PHX-SOV-AR (VLAN 203) - ✅ Configured **Status:** ✅ **19/19 Networks Configured (100%)** ### Network Settings Verification - [ ] All VLANs in "Internal" zone - [ ] "Isolate Network" unchecked for all VLANs - [ ] Zone Matrix: Internal → Internal = Allow All - [ ] DHCP configured appropriately - [ ] Gateway IPs match plan ### Firewall Configuration - [ ] Management → Service VLANs rules - [ ] Service VLANs → Management rules - [ ] Sovereign tenant isolation rules --- ## Summary **Status:** ✅ **100% COMPLETE - ALL VLANs CONFIGURED!** **Current State:** - ✅ **ALL 19 VLANs configured** (100% complete) - ✅ Core networks (Default, MGMT-LAN) operational - ✅ Besu networks (110-112) configured - ✅ Service VLANs (120-121, 130, 132-134) configured - ✅ Additional service VLANs (140-141, 150, 160) configured - ✅ Sovereign tenant VLANs (200-203) configured - ⚠️ PHX-SOV-DBIS shows `/24` instead of `/20` (needs verification) **Next Steps:** 1. ✅ ~~Verify all 19 networks~~ - **COMPLETE** 2. ⏳ Verify Network Isolation settings (ensure disabled for all VLANs) 3. ⏳ Verify Zone Matrix configuration (Internal → Internal = Allow All) 4. ⏳ Verify PHX-SOV-DBIS subnet (/24 vs /20) 5. ⏳ Test inter-VLAN routing 6. ⏳ Configure firewall rules for inter-VLAN communication 7. ⏳ Assign VMs/containers to appropriate VLANs **VLAN Plan Utilization:** ✅ **READY TO PROCEED** - All VLANs are configured! --- **Last Updated:** 2026-01-14