# Test Results Summary

**Date**: 2026-01-09  
**Status**: DNS ✅ Working | NAT ⏳ Needs Configuration

---

## Test Results

### ✅ DNS Resolution - Working
- `sankofa.nexus` → 76.53.10.35 ✅
- `secure.d-bis.org` → 76.53.10.35 ✅
- `mim4u.org` → 76.53.10.35 ✅

**Status**: All domains correctly resolve to the public IP.

---

### ❌ Public IP Connectivity - Not Reachable
- `76.53.10.35:80` → Connection failed
- `76.53.10.35:443` → Not tested (likely same)

**Status**: NAT rules may not be configured yet, or Nginx is not running.

**Possible Causes:**
1. ER605 NAT rules not configured
2. NAT rules configured but not applied
3. Firewall blocking traffic
4. Nginx not running on VMID 105

---

### ⚠️ Internal Nginx - Status Unclear
- `192.168.11.26:80` → No response

**Status**: Nginx may not be running or not configured yet.

---

## Next Steps

### 1. Verify ER605 NAT Configuration
- Check if NAT rules are configured in ER605/Omada Controller
- Verify rules are enabled and applied
- Check firewall rules allow traffic

### 2. Check Nginx Status
```bash
# Check if Nginx is running on VMID 105
pct exec 105 -- systemctl status nginx

# Check Nginx configuration
pct exec 105 -- nginx -t
```

### 3. Deploy Nginx Configuration
If Nginx is not configured:
```bash
./scripts/deploy-complete-nginx-config.sh
```

### 4. Test Again
After NAT and Nginx are configured:
```bash
# Test from internet
curl -I http://76.53.10.35
curl -I https://sankofa.nexus
```

---

## Current Status

| Component | Status | Action Needed |
|-----------|--------|---------------|
| DNS Records | ✅ Working | None |
| DNS Resolution | ✅ Working | None |
| ER605 NAT | ❌ Not Working | Configure NAT rules |
| Nginx | ⚠️ Unknown | Check/Deploy |
| SSL Certificates | ⏳ Pending | After NAT works |

---

**Recommendation**: Configure ER605 NAT rules first, then verify Nginx is running and configured.