# Migration Storage Issue - Analysis **Date:** 2025-01-20 **Status:** Issue Identified **Problem:** Direct migration fails due to storage name mismatch --- ## Problem Migration of VMs from r630-02 to r630-01 fails with error: ``` ERROR: migration aborted: storage 'thin1' is not available on node 'r630-02' ``` **For VMIDs 7800-7811:** ``` ERROR: migration aborted: storage 'thin4' is not available on node 'r630-01' ``` --- ## Root Cause ### Storage Configuration Mismatch **r630-02:** - VMs use `thin1` and `thin4` storage - These storage pools exist on r630-02 - thin1 on r630-02 is a different volume group than thin1 on r630-01 **r630-01:** - Has `thin1` storage (pve/thin1) - Does NOT have `thin4` storage - Storage names are the same but volume groups are different **Issue:** Proxmox migration tries to preserve storage names, but: - thin1 on r630-02 ≠ thin1 on r630-01 (different VGs) - thin4 doesn't exist on r630-01 --- ## Solutions ### Option 1: Manual Config Move + Storage Migration (Complex) 1. Move VM configs (already done for visibility) 2. Manually copy storage volumes using LVM commands 3. Complex and risky ### Option 2: Backup/Restore (Recommended but has issues) 1. Create backup using vzdump 2. Restore to target node with new storage 3. **Current issue:** vzdump also fails with same error ### Option 3: Enable thin4 on r630-01 (If needed) If we want to preserve thin4 storage name: 1. Create thin4 storage on r630-01 2. Then migration might work 3. But still has VG mismatch issue ### Option 4: Use Different Storage Names Migrate VMs to storage with different names: - VMIDs 100-130 → thin1 on r630-01 (already exists) - VMIDs 7800-7811 → local or local-lvm on r630-01 **This requires backup/restore method.** --- ## Recommended Solution ### Use vzdump with --remove (if supported) or manual backup Since vzdump is also failing, we need to: 1. **Check if storage volumes can be accessed directly** 2. **Use alternative backup method** 3. **Or manually copy storage volumes** ### Alternative: Change VM Storage First 1. On r630-02, change VM storage to a compatible storage (like `local`) 2. Then migrate normally 3. Then change storage on target if needed --- ## Next Steps 1. Investigate why vzdump fails (may need to check storage access) 2. Consider using `dd` or `lvconvert` to copy storage volumes 3. Or change VM storage configuration before migration 4. Or use shared storage (NFS) as intermediate --- **Last Updated:** 2025-01-20 **Status:** Issue Identified - Solution Investigation Needed