# Blockscout Static IP Configuration - Complete

**Date**: $(date)  
**Status**: ✅ **COMPLETED**

---

## ✅ Completed Actions

### 1. Static IP Configuration
- ✅ Container VMID 5000 configured with static IP: `192.168.11.140/24`
- ✅ Gateway: `192.168.11.1`
- ✅ MAC Address: `BC:24:11:3C:58:2B` (preserved)
- ✅ Network configuration verified

### 2. IP Address Verification
- ✅ Container now uses static IP matching all scripts and configurations
- ✅ All scripts reference `192.168.11.140` which now matches actual container IP

### 3. Scripts Created
- ✅ `scripts/set-blockscout-static-ip.sh` - Configure static IP
- ✅ `scripts/check-blockscout-actual-ip.sh` - Verify IP address
- ✅ `scripts/complete-blockscout-firewall-fix.sh` - Comprehensive connectivity check

---

## 📊 Configuration Details

### Container Network Configuration
```
Interface: eth0
IP Address: 192.168.11.140/24
Gateway: 192.168.11.1
Bridge: vmbr0
MAC Address: BC:24:11:3C:58:2B
Type: veth
```

### Before Configuration
- Container used DHCP (`ip=dhcp`)
- Actual IP may have differed from expected `192.168.11.140`
- Scripts referenced `192.168.11.140` but container may have had different IP

### After Configuration
- Container uses static IP `192.168.11.140/24`
- All scripts now reference the correct IP
- Configuration matches deployment scripts and network.conf

---

## 🔧 Scripts Updated

All scripts correctly reference `192.168.11.140`:
- ✅ `scripts/complete-blockscout-firewall-fix.sh`
- ✅ `scripts/configure-cloudflare-tunnel-route.sh`
- ✅ `scripts/access-omada-cloud-controller.sh`
- ✅ `scripts/fix-blockscout-explorer.sh`
- ✅ `scripts/install-nginx-blockscout.sh`

---

## 📝 Next Steps

### Remaining Manual Action
Configure Omada firewall rule:
1. Access Omada Controller: `bash scripts/access-omada-cloud-controller.sh`
2. Navigate to: Settings → Firewall → Firewall Rules
3. Create allow rule:
   - Source: `192.168.11.0/24`
   - Destination: `192.168.11.140:80`
   - Protocol: TCP
   - Action: Allow
   - Priority: High (above deny rules)

### Verification
After firewall rule is configured:
```bash
# Run comprehensive check
bash scripts/complete-blockscout-firewall-fix.sh

# Test connectivity
curl https://explorer.d-bis.org/health
```

---

## 🎯 Summary

**Issue**: Container used DHCP, IP may not have matched scripts  
**Solution**: Configured static IP `192.168.11.140/24`  
**Status**: ✅ **Configuration complete**  
**Remaining**: Manual firewall rule configuration

---

**Last Updated**: $(date)