# TODOs — Consolidated Task List

**Last Updated:** 2026-03-28  
**Last verification run:** 2026-03-28 — completable ✅ (61/61 on-chain), operator `--skip-backup` ✅ (NPMplus 40 hosts updated, Blockscout verify batch). Prior 2026-03-06 run: validate-config ✅, check-contracts, PMM pool balances ✅ (Pool 1: 2M/2M), preflight ✅, token-aggregation build ✅, E2E routing ✅ (37 domains, 0 failed). **Mint + add-liquidity** 2026-03-06: 1M each minted, 500k each added. **Next-steps check:** [NEXT_STEPS_LIST.md](NEXT_STEPS_LIST.md); B.1/B.2/B.3 partially blocked (WEMIX tabled; LINK relay runbook pending).  
**Purpose:** Single checklist of all next steps and remaining tasks. **Indonesia / HYBX-BATCH-001 zip (4.995 ship-ready):** [HYBX-BATCH-001 — transaction package ship-ready](#hybx-batch-001--transaction-package-ship-ready-4995) below. **Full execution order (multiple routes + liquidity):** [EXECUTION_CHECKLIST_MULTIPLE_ROUTES_AND_LIQUIDITY.md](EXECUTION_CHECKLIST_MULTIPLE_ROUTES_AND_LIQUIDITY.md). **Additional paths (registry, LiFi/Jumper, Etherlink, 13×13):** [ADDITIONAL_PATHS_AND_EXTENSIONS.md](../04-configuration/ADDITIONAL_PATHS_AND_EXTENSIONS.md). **Dotenv/markdown audit (required info, gaps, recommendations):** [DOTENV_AND_MARKDOWN_AUDIT_GAPS_AND_RECOMMENDATIONS.md](DOTENV_AND_MARKDOWN_AUDIT_GAPS_AND_RECOMMENDATIONS.md). Source of truth for the full list: [NEXT_STEPS_AND_REMAINING_TODOS.md](NEXT_STEPS_AND_REMAINING_TODOS.md). **Token deployments remaining:** [TOKEN_CONTRACT_DEPLOYMENTS_REMAINING.md](../11-references/TOKEN_CONTRACT_DEPLOYMENTS_REMAINING.md). **Routing / swap / cross-chain:** [TASKS_ROUTING_SWAP_CROSSCHAIN.md](TASKS_ROUTING_SWAP_CROSSCHAIN.md) (A1–A5, B1–B8, C1–C8, D1–D3, E1–E2). **Verified list (LAN/Operator):** [REQUIRED_FIXES_GAPS_AND_DEPLOYMENTS_LIST.md](REQUIRED_FIXES_GAPS_AND_DEPLOYMENTS_LIST.md) — run bash/curl to confirm; doc updated 2026-03-03.

**Quick run:** From anywhere (no LAN): `./scripts/run-completable-tasks-from-anywhere.sh`. Before Chain 138 deploy: `./scripts/deployment/preflight-chain138-deploy.sh [--cost]`. **Chain 138 next steps (all in one):** `./scripts/deployment/run-all-next-steps-chain138.sh [--dry-run] [--skip-mirror] [--skip-register-gru] [--skip-verify]` — preflight → mirror+pool → register c* as GRU → verify. From LAN with secrets: `./scripts/run-all-operator-tasks-from-lan.sh [--deploy] [--create-vms]`. **E2E flows (full parallel):** `./scripts/run-e2e-flow-tasks-full-parallel.sh [--dry-run]` — [TASKS_TO_INCREASE_ALL_E2E_FLOWS](TASKS_TO_INCREASE_ALL_E2E_FLOWS.md).

**Full deployment order:** [DEPLOYMENT_ORDER_OF_OPERATIONS.md](../03-deployment/DEPLOYMENT_ORDER_OF_OPERATIONS.md) — Phase 0–6. **Remaining for full network coverage:** [REMAINING_DEPLOYMENTS_FOR_FULL_NETWORK_COVERAGE.md](../03-deployment/REMAINING_DEPLOYMENTS_FOR_FULL_NETWORK_COVERAGE.md) — A: mint + add liquidity (138) → B–D. **Status to continue (before Phase A mint):** [REMAINING_DEPLOYMENTS § Status to continue](../03-deployment/REMAINING_DEPLOYMENTS_FOR_FULL_NETWORK_COVERAGE.md) and [CORE_RPC_2101_2102_TXPOOL_ADMIN_STATUS §7](../04-configuration/CORE_RPC_2101_2102_TXPOOL_ADMIN_STATUS.md) — restart validator 1004, clear tx pool, then mint. **Phase execution 2026-03-04:** A.1 attempted (tx timeout); A.2 pending; B.1 Celo ✅; B.2 Wemix blocked; B.3 fund-ccip ready; Phase C/D runbooks. **Full plan:** [COMPLETE_REQUIRED_OPTIONAL_RECOMMENDED_INDEX.md](COMPLETE_REQUIRED_OPTIONAL_RECOMMENDED_INDEX.md).

**Last completable run (2026-03-02):** Config validation OK; on-chain 59/59; run-all-validation --skip-genesis OK; reconcile-env. **Preflight** and **run-all-next-steps-chain138.sh** run: preflight passed; mirror/pool present; 12 c* already GRU-registered; verification 59/59. Documentation: MASTER_INDEX, README, RUNBOOKS_MASTER_INDEX created; deprecated list and consolidation plan updated. Progress indicators (Step 1/4–4/4) in run-completable-tasks-from-anywhere.sh. E2E flow tasks script and doc updates (ADDRESS_MATRIX_AND_STATUS, RECOMMENDATIONS R2, NEXT_STEPS_FOR_YOU) completed. **Optional completed (2026-02-27 / 2026-03-01):** DeployCompliantFiatTokens (10 tokens); Blockscout verification; MCP allowlist-138; add-liquidity runbook; token-aggregation fallbacks + ENV_EXAMPLE_CONTENT; E2E routing verification; PMM_DEX_ROUTING_STATUS + REQUIRED_FIXES_AND_DEPLOYMENTS_STATUS updated; cCADT line (commented) in DeployCompliantFiatTokens.s.sol. **Within-scope list (2026-02-27):** CompliantWrappedToken.sol; DeployCompliantFiatTokensForChain.s.sol (c* any chain); DeployCWTokens.s.sol (cWUSDT/cWUSDC); deploy-tokens-and-weth-all-chains-skip-canonical.sh extended with --deploy-c, --deploy-cw, 651940 env validation; TOKENS_DEPLOYER_DEPLOYED_ON_OTHER_CHAINS §6 implemented; ENV_EXAMPLE_CONTENT c*/cW*/651940 vars. **2026-02-27:** Deployment order doc, preflight script, deployment safety added; todos synced.

**Verified (LAN/Operator) 2026-03-06:** Preflight ✅; Core RPC 192.168.11.211:8545 ✅; deployer balance script ✅ (native ETH OK; WETH/cUSDT/cUSDC = 0 → add liquidity blocked); on-chain 59/59 ✅; config validation ✅; token-aggregation build ✅; E2E 502s fixed (address-all-remaining-502s + NPM; E2E 37 domains 0 failed); operator script run ✅ (NPMplus RPC fix, Blockscout verify). **Earlier:** 2026-03-03–04 deployer balance, on-chain, DODOPMMIntegration canonical cUSDT/cUSDC — [EXPLORER_TOKEN_LIST_CROSSCHECK](../11-references/EXPLORER_TOKEN_LIST_CROSSCHECK.md) §8.

**Operator copy-paste commands:** [OPERATOR_READY_CHECKLIST.md](OPERATOR_READY_CHECKLIST.md) — one page with exact commands for every pending todo.

---

## Remaining to complete (verified 2026-03-06)

| # | Task | Verified | Notes |
|---|------|----------|--------|
| V1 | **Token-aggregation build** | ✅ Done | Fixed 2026-03-03; re-verified 2026-03-06: `npm run build` passes. |
| V2 | **Add liquidity (Chain 138 PMM)** | ✅ Done (2026-03-06) | Mint + add-liquidity run: 1M cUSDT/cUSDC minted, 500k each added to Pool 1. Pool 1 now 2M/2M. To add more: `cd smom-dbis-138 && ./scripts/mint-for-liquidity.sh --add-liquidity`. |
| V3 | **RPC 2101 read-only** | ⚠️ If needed | Run `make-rpc-vmids-writable-via-ssh.sh` + `health-check-rpc-2101.sh` only when host I/O errors occur. Not required when preflight passes. |
| V4 | **Wemix / Gnosis / Celo CCIP bridges** | 🔄 Partial | Celo + **Gnosis** CCIP bridges deployed (2026-03-04). Gnosis: 0x4ab39b5B… (WETH9), 0xC15ACdBA… (WETH10); .env updated. **Wemix tabled** (no in-repo route ETH/BNB/POLY→WEMIX; see [WEMIX_ACQUISITION_TABLED](../03-deployment/WEMIX_ACQUISITION_TABLED.md)). Cronos: set CRONOS_RPC and CCIP_ROUTER_CRONOS in .env then run deploy-bridges-config-ready-chains.sh cronos. |
| V5 | **LINK relay, E2E 502s, operator run** | 🔄 Partial | **E2E 502s** ✅ Fixed 2026-03-06 (address-all-remaining-502s.sh + NPM update; E2E 37 domains 0 failed). **Operator run** ✅ Run 2026-03-06 (NPMplus RPC fix, Blockscout verify). **LINK support runbook** ⏳ Pending — implement per [RELAY_BRIDGE_ADD_LINK_SUPPORT_RUNBOOK](../07-ccip/RELAY_BRIDGE_ADD_LINK_SUPPORT_RUNBOOK.md). |
| V6 | **External (Ledger, Trust, CoinGecko/CMC, on-ramps)** | ⏳ Pending | Per REQUIRED_FIXES_GAPS_AND_DEPLOYMENTS_LIST §4–5. |

---

## HYBX-BATCH-001 — transaction package ship-ready (4.995)

**Goal:** `transaction-package-HYBX-BATCH-001.zip` passes `bash scripts/omnl/check-transaction-package-4995-readiness.sh --strict <unzipped-root>` and `python3 scripts/omnl/verify-transaction-package-commitment.py <unzipped-root>`.

**Standard:** [INDONESIA_PACKAGE_4_995_EVIDENCE_STANDARD.md](../04-configuration/mifos-omnl-central-bank/INDONESIA_PACKAGE_4_995_EVIDENCE_STANDARD.md). **Build:** `scripts/omnl/build-transaction-package-zip.sh` (optional `HYBX_LEDGER_FILE` for production ledger). **Live snapshot:** `scripts/omnl/omnl-transaction-package-snapshot.sh`.

### Strict gate (automated checklist)

| ID | Task | Notes |
|----|------|--------|
| **H1** | **Live OMNL snapshot** | Run `omnl-transaction-package-snapshot.sh` with Fineract credentials; `omnl_transaction_package_snapshot.json` must have `snapshotMeta.source == "live-api"`. Rebuild zip so Volume A Section 2 contains this file. |
| **H2** | **Snapshot freshness** | Per policy: `generatedAtUtc` within staleness window (standard default ≤ 72h before transmission). Refresh snapshot + rebuild if stale. |
| **H3** | **ISO 20022 vault manifest** | `Appendix/ISO20022_VAULT_MANIFEST_HYBX-BATCH-001.json`: replace all `REPLACE_*` placeholders (e.g. `REPLACE_WITH_VAULT_OBJECT_SHA256`) with real `sha256` / `storageLocation` / `messageId`; ≥1 message; align Section 4 index with ids. |
| **H4** | **Institutional attestation JSON** | Package must include `Appendix/INSTITUTIONAL_PACKAGE_SCORE_ATTESTATION_4_995.json` (from `.EXAMPLE`, completed). `targetScorePerCategory` and each of 12 `categoryScores` ≥ 4.995; `certifiedBy` ≥ 2; finalize `legalFinality.counselMemoPdfSha256` and `independentAudit.reportPdfSha256` (no `REPLACE_`). Build picks up `proof_package/regulatory/…` or set `PACKAGE_4995_ATTESTATION_JSON`. |
| **H5** | **Regulatory references annex** | `Appendix/INDONESIA_REGULATORY_REFERENCES_ANNEX.md`: remove every `INSTITUTION: insert`; each row has instrument id + URL or internal doc id. |
| **H6** | **Re-verify** | Unzip rebuilt package; run strict script + commitment verify (commands in Validation commands below). |

### Standard categories (complete even when script is green)

| ID | Task | Notes |
|----|------|--------|
| **H7** | **Master proof manifest** | `Appendix/INDONESIA_MASTER_PROOF_MANIFEST.md`: every sections 1–15 primary artifact path exists in zip; no TODO/TBD on mandatory index lines. |
| **H8** | **Ledger provenance** | If 215k-row file is system-of-record, document in attestation (`provenance.hybxLedgerSource` / equivalent); build with `HYBX_LEDGER_FILE` when binding production extract. |
| **H9** | **AML / PPATK schedule** | `Appendix/AML_PPATK_EVIDENCE_SCHEDULE_HYBX-BATCH-001.md`: complete through section 6; sanctions / PEP / STR-SAR done or documented nil with approver name/date. |
| **H10** | **BI reporting crosswalk** | `Appendix/BI_REPORTING_CROSSWALK_HYBX-BATCH-001.md`: no blank cells (instrument id, obligation, frequency, owner). |
| **H11** | **MoF memo** | `Appendix/MOF_ALIGNMENT_MEMO_HYBX-BATCH-001.md`: signed with role/title + date; hash/e-sign per process. |
| **H12** | **OJK prudential bridge** | `Appendix/OJK_PRUDENTIAL_BRIDGE_HYBX-BATCH-001.md`: mappings filled; N/A only where justified. |
| **H13** | **Legal finality** | Meet `LEGAL_FINALITY_COUNSEL_MEMO_REQUIREMENTS_HYBX-BATCH-001.md`; counsel memo PDF or hash in SUBREG; ties to H4. |
| **H14** | **Independent audit (Section 15)** | Meet `INDEPENDENT_AUDIT_4_995_REQUIREMENTS_HYBX-BATCH-001.md`; report hash in manifest/attestation; ties to H4. |
| **H15** | **TSA / QES (if policy requires)** | Run `apply-qes-tsa-to-staging.sh` with real `TSA_URL` / `QES_SIGN_*` before zipping, or document waiver in attestation. |
| **H16** | **Final archive** | One clean `build-transaction-package-zip.sh` after all sources final; ship the exact tree that passed H6. |

---

## First (before any Chain 138 deploy)

Verified 2026-03-06: preflight ✅, 0a balance check ✅ (script runs; WETH/cUSDT/cUSDC = 0), config validation ✅, on-chain 59/59 ✅. Re-run 0a/0/0c before each deploy.

| # | Task | Owner | Ref |
|---|------|--------|-----|
| 0a | **Check deployer gas (Chain 138):** Run balance/gas check using **Core RPC only**. | Operator/LAN | `RPC_URL_138=http://192.168.11.211:8545 ./scripts/deployment/check-deployer-balance-chain138-and-funding-plan.sh` or `cd smom-dbis-138 && ./scripts/deployment/check-balances-gas-and-deploy.sh` |
| 0b | **Core Besu RPC (VMID 2101) use IP:port, not FQDN:** Set `RPC_URL_138=http://192.168.11.211:8545` in `smom-dbis-138/.env` for admin/deploy. Do not use `https://rpc-core.d-bis.org` for deployment (DNS/tunnel can fail; IP is direct to node). | Operator | [RPC_ENDPOINTS_MASTER](../04-configuration/RPC_ENDPOINTS_MASTER.md), [VMID_IP_FIXED_REFERENCE](../11-references/VMID_IP_FIXED_REFERENCE.md) |
| 0c | **Test all contracts before deploying:** Run from repo root (see commands below). Unit-only run verified 2026-03-06 (457 tests passed). Full run can take 5–15+ min. | Anyone | [DEPLOYMENT_ORDER_OF_OPERATIONS](../03-deployment/DEPLOYMENT_ORDER_OF_OPERATIONS.md) § Phase 0.8 |

**Test-all-contracts commands (from repo root):**

```bash
# Full build + test (can take 5–15+ minutes)
./scripts/deployment/test-all-contracts-before-deploy.sh

# Quick check: print commands only
./scripts/deployment/test-all-contracts-before-deploy.sh --dry-run

# Faster: unit tests only (skip Fork/Mainnet/Integration/e2e)
./scripts/deployment/test-all-contracts-before-deploy.sh --no-match "Fork|Mainnet|Integration|e2e"

# Include alltra-lifi-settlement
./scripts/deployment/test-all-contracts-before-deploy.sh --alltra
```

| 0 | **Before Chain 138 deploy:** Run preflight (RPC, dotenv, nonce, optional cost). Preflight defaults to `http://192.168.11.211:8545` when `RPC_URL_138` unset. | Anyone | `./scripts/deployment/preflight-chain138-deploy.sh [--cost]`; [DEPLOYMENT_ORDER_OF_OPERATIONS](../03-deployment/DEPLOYMENT_ORDER_OF_OPERATIONS.md) § Phase 0 |

---

## Routing, swap, and cross-chain

**Full list and commands:** [TASKS_ROUTING_SWAP_CROSSCHAIN.md](TASKS_ROUTING_SWAP_CROSSCHAIN.md).

| ID | Area | Task | Status / notes |
|----|------|------|-----------------|
| **A1** | Same-chain swap | Add liquidity to PMM pools (cUSDT/cUSDC first) | ✅ Done 2026-03-06 (Pool 1: 2M/2M). Mint more + add: `mint-for-liquidity.sh --add-liquidity`. |
| **A2** | Same-chain swap | Token-aggregation indexes DODO on 138 | Set CHAIN_138_DODO_PMM_INTEGRATION; GET /api/v1/quote returns DODO quotes. |
| **A3** | Same-chain swap | Expose token-aggregation API for dApps/Snap | Proxy /api/v1/* or GATSBY_SNAP_API_BASE_URL. |
| **A4** | Same-chain (opt.) | Deploy EnhancedSwapRouter on 138 | After Uniswap/Balancer pools exist. |
| **A5** | Same-chain (opt.) | N-hop quote/pathfinding in token-aggregation | Single-hop only today. |
| **B1** | Cross-chain | Cronos (25): deploy CCIP bridges + complete-config | Fund ~15 CRO; deploy-bridges-config-ready-chains.sh cronos. |
| **B2** | Cross-chain | Wemix (1111): deploy CCIP bridges + complete-config | Fund ~0.4 WEMIX; WEMIX_ACQUISITION_TABLED. |
| **B3** | Cross-chain | Fund all CCIP bridges with LINK | fund-ccip-bridges-with-link.sh. |
| **B4** | Cross-chain | Routing registry + token-mapping include new chains | Update routing-registry.json, token-mapping-multichain.json. |
| **B5** | Cross-chain | Wemix token addresses (scan.wemix.com to config) | High priority 1. |
| **B6** | Cross-chain | GET /api/v1/bridge/routes returns Chain 138 bridges | BRIDGE_LIST_JSON_URL or built-in. |
| **B7** | Cross-chain | Token mapping API 138 to destination | token-mapping-multichain.json includes all target chains. |
| **B8** | Cross-chain | AlltraAdapter setBridgeFee + env | ALLTRA_BRIDGE_FEE, ALLTRA_ADAPTER_CHAIN138. |
| **C1-C2** | Swap-bridge-swap | Complete Flow A (liquidity) + Flow B (bridge + LINK) | Prerequisites. |
| **C3** | Swap-bridge-swap | POST /api/bridge/quote with sourceSwapQuote + destinationSwapQuote | BRIDGE_REGISTRY_ADDRESS; optional router env. |
| **C4** | Swap-bridge-swap | Destination DEX/aggregator for destinationSwapQuote | Wire QuoteService per chain. |
| **C5** | Swap-bridge-swap (opt.) | Deploy SwapBridgeSwapCoordinator | One tx: swap then bridge then swap. |
| **C6-C8** | Swap-bridge-swap | Bridge UI, full-path quote UI, E2E test | Code/Op. |
| **D1** | Phase C | Deploy or bridge cW* per chain; deployment-status + .env | PHASE_C_CW_AND_EDGE_POOLS_RUNBOOK. |
| **D2** | Phase C | Create and fund PMM edge pools per pool-matrix | deployment-status.json. |
| **D3** | Phase C (opt.) | Stabilization bot or peg bands for cW* | cross-chain-pmm-lps. |
| **E1** | Ops | Deployer gas auto-route | deployer-gas-auto-route.sh; DEPLOYER_GAS_AUTO_ROUTE_RUNBOOK. |
| **E2** | Ops | Acquire CRO and WEMIX (manual routes) | acquire-cro-and-wemix-gas.sh; cro-wemix-swap-routes.json. |

---

## High priority

| # | Task | Owner | Ref |
|---|------|--------|-----|
| 1 | **Wemix (1111) token addresses:** Confirm WETH, USDT, USDC on [scan.wemix.com/tokens](https://scan.wemix.com/tokens); if different official addresses, update `config/token-mapping-multichain.json` and WEMIX_TOKEN_VERIFICATION.md; run `validate-config-files.sh`. | Operator | RECOMMENDED_COMPLETION_CHECKLIST §1 |
| 2 | **Gnosis, Celo, Wemix CCIP bridges:** Per chain: set RPC, CCIP Router, LINK, WETH9/WETH10; run DeployWETHBridges; on 138 add destinations; on each new chain add 138; fund LINK; update env/docs. | Operator/LAN | CONFIG_READY_CHAINS_COMPLETION_RUNBOOK |

---

## Medium priority

| # | Task | Owner | Ref |
|---|------|--------|-----|
| 3 | **LINK support on Mainnet relay:** Option A or B per runbook; implement, deploy, fund LINK; set `relaySupported: true` for LINK in token-mapping.json; update docs. | Operator/LAN | RELAY_BRIDGE_ADD_LINK_SUPPORT_RUNBOOK |
| 4 | **Run "from anywhere" checks periodically:** `./scripts/run-completable-tasks-from-anywhere.sh` | Anyone | NEXT_STEPS_FOR_YOU §2 — ✅ Run 2026-03-06 |
| 5 | **Placeholders (code):** All done or documented per [REQUIRED_FIXES_UPDATES_GAPS.md](../REQUIRED_FIXES_UPDATES_GAPS.md) §4: canonical addresses (env), AlltraAdapter setBridgeFee, smart accounts kit (env + runbook), quote service FABRIC_CHAIN_ID (default 999), .bak ([BAK_FILES_DEPRECATION.md](../../smom-dbis-138/docs/BAK_FILES_DEPRECATION.md)). | Dev | REQUIRED_FIXES_UPDATES_GAPS |
| 6 | **API keys:** Sign up per reports/API_KEYS_REQUIRED.md; add to `.env`. | Anyone | NEXT_STEPS_FOR_YOU §2 |

---

## When you have LAN / Proxmox + secrets

| # | Task | Owner | Ref |
|---|------|--------|-----|
| 7 | **Blockscout verification:** `./scripts/run-all-operator-tasks-from-lan.sh` (loads dotenv) or `./scripts/verify/run-contract-verification-with-proxy.sh`. Last run 2026-03-06 (submissions done). | Operator/LAN | CONTRACT_DEPLOYMENT_RUNBOOK |
| 8 | **Fix E2E 502s (if needed):** ✅ Fixed 2026-03-06 (MIM4U 7810 added to fix-all-502s-comprehensive.sh; address-all-remaining-502s + NPM + E2E → 37 domains 0 failed). Re-run `./scripts/maintenance/address-all-remaining-502s.sh [--e2e]` if 502s recur. | Operator/LAN | 502_DEEP_DIVE_ROOT_CAUSES_AND_FIXES |
| 9 | **Operator tasks script:** `./scripts/run-all-operator-tasks-from-lan.sh [--deploy] [--create-vms]`. Last run 2026-03-06 (Wave 0 NPMplus RPC fix + Blockscout verify; use --skip-backup if NPM_PASSWORD unset). | Operator/LAN | STEPS_FROM_PROXMOX_OR_LAN_WITH_SECRETS |
| 10 | **sendCrossChain (real):** `bash scripts/bridge/run-send-cross-chain.sh 0.01` (when PRIVATE_KEY and LINK ready) | Operator/LAN | NEXT_STEPS_OPERATOR W0-2 |
| 11 | **NPMplus backup:** `bash scripts/verify/backup-npmplus.sh` | Operator/LAN | NEXT_STEPS_OPERATOR W0-3 |
| 12 | **Mint tokens to deployer for liquidity/bridges:** See [TOKENS_AND_NETWORKS_MINTABLE_TO_DEPLOYER](../11-references/TOKENS_AND_NETWORKS_MINTABLE_TO_DEPLOYER.md) — Chain 138: owner mint (cUSDT, cUSDC, cEURC, …); Cronos: MintController (D-WIN W); other chains: acquire via wrap/bridge/DEX. | Operator/LAN | TOKENS_AND_NETWORKS_MINTABLE_TO_DEPLOYER |

---

## E2E Flows (Full Parallel)

All tasks from [TASKS_TO_INCREASE_ALL_E2E_FLOWS.md](TASKS_TO_INCREASE_ALL_E2E_FLOWS.md). Run in waves; within each wave run in **full parallel** when possible. Script: `./scripts/run-e2e-flow-tasks-full-parallel.sh [--dry-run]`.

| Wave | Tasks | Run in parallel |
|------|--------|-----------------|
| E0 | X1, X6, X7, A1 — RPC writable, TransactionMirror, deployer funded, Core RPC | Op |
| E1 | A2, A3, A4 — PMM pools create, register, add liquidity (Chain 138) | run-pmm-full-parity-all-phases.sh Phase 1 |
| E2 | B1, B2 — CCIP config and fund bridges (per chain parallel) | complete-config-ready-chains.sh, fund-ccip-bridges-with-link.sh |
| E3 | A5, B4, B5, C3, X8 — token-aggregation env, bridge routes, token mapping, quote API, token list | Code/Op |
| E4 | X2, X3, X4, X5 — Blockscout verify, E2E routing, explorer E2E, token-aggregation health | Op/LAN |
| E5 | X10, X11, X12 — cUSDT/cUSDC and PMM on L2s; token-aggregation for new chains | run-pmm-full-parity Phase 2 (parallel per chain) |
| E6 | B6, B7, C5, C6, C7 — Bridge UI, test bridge, destination DEX, full path quote UI, E2E test | Code/Op |
| E7 | X13, X14 — Update PMM_DEX_ROUTING_STATUS; runbooks | Doc |

Flow A (swap 138): A1–A6; A7–A8 optional. Flow B (bridge): B1–B7. Flow C (swap-bridge-swap): C1–C7 (depends on A+B).

---

## Token contract deployments (remaining)

Full list: [TOKEN_CONTRACT_DEPLOYMENTS_REMAINING.md](../11-references/TOKEN_CONTRACT_DEPLOYMENTS_REMAINING.md).

| # | Task | Owner | Ref |
|---|------|--------|-----|
| T1 | **DeployCompliantFiatTokens (Chain 138):** cEURC, cEURT, cGBPC, cGBPT, cAUDC, cJPYC, cCHFC, cCADC, cXAUC, cXAUT. Prereq: CREATE2_FACTORY_ADDRESS. Use Core RPC (IP:port). | ✅ Done 2026-02-27 | TOKEN_CONTRACT_DEPLOYMENTS_REMAINING §1 |
| T2 | **Optional cCADT:** Uncomment cCADT line in DeployCompliantFiatTokens.s.sol and re-run script when needed (Tether-style CAD). | Dev/Op | TOKEN_CONTRACT_DEPLOYMENTS_REMAINING §1.2 |
| T3 | **cAUSDT:** Deploy or env when Alltra compliant USD token defined; no script in repo. | TBD | TOKEN_CONTRACT_DEPLOYMENTS_REMAINING §1.3 |
| T4 | **ACADT (ALL Mainnet 651940):** No script in repo; address TBD when Alltra adds CAD token. | TBD | TOKEN_CONTRACT_DEPLOYMENTS_REMAINING §2 |
| T5 | **cW* on public chains:** Deploy/bridge cW* per chain; create PMM edge pools per pool-matrix. | Operator | TOKEN_CONTRACT_DEPLOYMENTS_REMAINING §3 |
| T6 | **D-WIN W on 138/651940 (optional):** Extend DeployISO4217WSystem for Chain 138 or 651940 if desired. | Planned | TOKEN_CONTRACT_DEPLOYMENTS_REMAINING §4 |
| T7 | **Vault ac*/vdc*/sdc* for new base tokens:** After DeployCompliantFiatTokens, extend DeployAcVdcSdcVaults for each new base. | Operator/LAN | TOKEN_CONTRACT_DEPLOYMENTS_REMAINING §5 |

---

## Low priority (planned deployments)

| # | Task | Owner | Ref |
|---|------|--------|-----|
| 12 | **AddressMapper on other chains:** Deploy via DeployAddressMapperOtherChain; set `mapper` in smart-contracts-master.json. (Cronos done.) | Planned | OPTIONAL_DEPLOYMENTS_START_HERE §A |
| 13 | **DODO PMM on 138:** Integration and pools **already deployed** (2026-02-28). Remaining: add liquidity (AddLiquidityPMMPoolsChain138 / run-pmm-full-parity); document in LIQUIDITY_POOLS_MASTER_MAP. | Planned | NEXT_STEPS_PMM_FULL_PARITY_AND_ALL_POOLS |
| 14 | **Mainnet trustless stack:** Deploy Lockbox138 (138) + InboxETH, BondManager, LiquidityPoolETH (Mainnet) per runbook; fund liquidity. | Planned | OPTIONAL_DEPLOYMENTS_START_HERE §C |

---

## External / third-party

| # | Task | Owner | Ref |
|---|------|--------|-----|
| 15 | **Ledger:** Await response to Tally form; sign agreement and follow integration steps. | You | ADD_CHAIN138_TO_LEDGER_LIVE |
| 16 | **Trust Wallet:** Open PR to trustwallet/wallet-core with Chain 138 registry entry. | You | ADD_CHAIN138_TO_TRUST_WALLET |
| 17 | **Consensys:** Outreach for native Swaps/Bridge for Chain 138. | You | CONSENSYS_OUTREACH_PACKAGE |
| 18 | **CoinGecko/CMC:** Submit Chain 138 and tokens for MetaMask USD. | You | COINGECKO_SUBMISSION_GUIDE |

---

## Tezos / Etherlink (when scoped)

| # | Task | Owner | Ref |
|---|------|--------|-----|
| 19 | Verify Etherlink (42793) on CCIP; record selector/Router/fee or "custom relay only." | Ops/Eng | TEZOS_CCIP_REMAINING_ITEMS |
| 20 | Verify Jumper and LiFi for 138, 651940, 42793, Tezos; update support matrix. | Eng | TEZOS_CCIP_REMAINING_ITEMS |
| 21 | InitializeRegistry, DeployAllAdapters; Etherlink receiver; Tezos L1 and Etherlink relay services. | Operator/LAN | TEZOS_CCIP_REMAINING_ITEMS |

---

## Deployment / infrastructure phases

| Phase | Tasks | Status |
|-------|--------|--------|
| Phase 1 — VLAN | UDM Pro VLAN; VLAN-aware bridge; migrate services to VLANs | ⏳ Pending |
| Phase 2 — Observability | Monitoring stack; Grafana via Cloudflare Access; alerts | ⏳ Pending |
| Phase 3 — CCIP fleet | CCIP Ops/Admin; commit/execute/RMN nodes; NAT pools | ⏳ Pending |
| Phase 4 — Sovereign tenants | Sovereign VLANs; tenant isolation; access control | ⏳ Pending |
| ~~Missing~~ containers 2506–2508 | **Destroyed 2026-02-08**; replaced by new RPC structure (2101, 2201, 2301, 2303–2308, 2400–2403). RPC range 2500–2505 only. No create action. See [MISSING_CONTAINERS_LIST.md](../03-deployment/MISSING_CONTAINERS_LIST.md). | Done (doc only) |

---

## Security & codebase

| # | Task | Ref |
|---|------|-----|
| 22 | **Security audits:** smom VLT-024, ISO-024; bridge BRG-VLT, BRG-ISO. | TODO_TASK_LIST_MASTER §5 |
| 23 | **dbis_core:** ~1186 TS errors (deferred). | TODO_TASK_LIST_MASTER §8 |
| 24 | **Paymaster (optional):** Deploy when sources ready. | SMART_ACCOUNTS_DEPLOYMENT_NOTE |

---

## Maintenance (ongoing)

| Task | Frequency |
|------|-----------|
| Monitor explorer sync / RPC health (e.g. VMID 2201) | Daily |
| Check config API uptime | Weekly |
| Review explorer logs | Weekly |
| Update token list | As needed |
| Fix E2E 502s when domains 502 | As needed — from LAN: `address-all-remaining-502s.sh` |

Cron: `schedule-daily-weekly-cron.sh --install`; NPMplus backup: `schedule-npmplus-backup-cron.sh --install`.

---

## Validation commands

| Check | Command |
|-------|---------|
| Completable from anywhere | `./scripts/run-completable-tasks-from-anywhere.sh` |
| Validate (Proxmox SSH) | `bash scripts/run-via-proxmox-ssh.sh validate [--host IP]` — shellcheck (full) + genesis validation; installs jq/shellcheck on host if missing |
| All validation (CI) | `bash scripts/verify/run-all-validation.sh [--skip-genesis]` |
| Config files | `bash scripts/validation/validate-config-files.sh` |
| On-chain (Chain 138) | `./scripts/verify/check-contracts-on-chain-138.sh` |
| E2E routing | `./scripts/verify/verify-end-to-end-routing.sh` |
| **Test all contracts (before deploy)** | `./scripts/deployment/test-all-contracts-before-deploy.sh` — use `--dry-run` / `--no-match "Fork|Mainnet|Integration|e2e"` / `--alltra` |
| **HYBX package commitment** | `python3 scripts/omnl/verify-transaction-package-commitment.py <unzipped-root>` | After unzip |
| **HYBX package 4.995 strict** | `bash scripts/omnl/check-transaction-package-4995-readiness.sh --strict <unzipped-root>` | All H1–H6 must pass |

---

## Gaps and additional recommendations (full checklist)

All gaps and additional recommendations to implement are consolidated in:

- **[TASKS_ROUTING_SWAP_CROSSCHAIN.md](TASKS_ROUTING_SWAP_CROSSCHAIN.md)** — Routing, swap, and cross-chain only: same-chain swap (A1–A5), bridges and routing (B1–B8), swap–bridge–swap (C1–C8), cW* edge pools (D1–D3), deployer gas routing (E1–E2).
- **[ADDITIONAL_RECOMMENDATIONS_TABLE.md](ADDITIONAL_RECOMMENDATIONS_TABLE.md)** — Immediate/blocking (V2–V6), pre-deploy (0a–0), high/medium/LAN (1–12), token deployments (T2–T7), low priority (12–14), external (15–18), operator R1–R24, Proxmox (1–35), code quality (36–43), documentation (44–47, 68–74), security (48–52), config/testing (53–67), infrastructure (75–81), codebase (82–91), MetaMask/explorer (92–105), Tezos/LiFi/Jumper (106–121), Besu (122–126), maintenance (135–139), E2E waves (E0–E7), operator quick reference (22).
- **[REQUIRED_FIXES_GAPS_AND_DEPLOYMENTS_LIST.md](REQUIRED_FIXES_GAPS_AND_DEPLOYMENTS_LIST.md)** — Required fixes (§1), gaps (§2), additional deployments (§3), operator/LAN tasks (§4), external (§5), quick reference (§6).

**Run in full parallel when possible** (scriptable tasks; from repo root):

| # | Task | Command | Notes |
|---|------|---------|-------|
| 1 | Completable from anywhere | `./scripts/run-completable-tasks-from-anywhere.sh` | No LAN required |
| 2 | Preflight (Chain 138) | `./scripts/deployment/preflight-chain138-deploy.sh [--cost]` | Use Core RPC |
| 3 | Deployer gas check | `RPC_URL_138=http://192.168.11.211:8545 ./scripts/deployment/check-deployer-balance-chain138-and-funding-plan.sh` | LAN/RPC required |
| 4 | Deployer gas auto-route | `./scripts/deployment/deployer-gas-auto-route.sh [--dry-run]` | Optional --dry-run |
| 5 | Validate config files | `./scripts/validation/validate-config-files.sh` | |
| 6 | Test all contracts (dry-run) | `./scripts/deployment/test-all-contracts-before-deploy.sh --dry-run` | Or run full / unit-only |
| 7 | On-chain check (Chain 138) | `./scripts/verify/check-contracts-on-chain-138.sh [RPC_URL]` | LAN/RPC required |
| 8 | E2E flow tasks (parallel) | `./scripts/run-e2e-flow-tasks-full-parallel.sh [--dry-run]` | See TASKS_TO_INCREASE_ALL_E2E_FLOWS |
| 9 | Operator tasks (LAN) | `./scripts/run-all-operator-tasks-from-lan.sh [--deploy]` | LAN + secrets required |

Run 1, 4, 5, 6 in parallel from anywhere; 2, 3, 7, 8, 9 when LAN/RPC and secrets are available.

---

## References

- [TASKS_ROUTING_SWAP_CROSSCHAIN.md](TASKS_ROUTING_SWAP_CROSSCHAIN.md) — routing, swap, and cross-chain tasks (A1–A5, B1–B8, C1–C8, D1–D3, E1–E2)
- [RECOMMENDATIONS_AND_FIXES_BEFORE_DEPLOY.md](../03-deployment/RECOMMENDATIONS_AND_FIXES_BEFORE_DEPLOY.md) — all recommendations and fixes before deploying smart contracts and PMM pools
- [TOKEN_CONTRACT_DEPLOYMENTS_REMAINING.md](../11-references/TOKEN_CONTRACT_DEPLOYMENTS_REMAINING.md) — remaining token deployments by category
- [OPERATOR_READY_CHECKLIST.md](OPERATOR_READY_CHECKLIST.md) — copy-paste commands for all operator/LAN tasks
- [NEXT_STEPS_AND_REMAINING_TODOS.md](NEXT_STEPS_AND_REMAINING_TODOS.md) — full detail and completed items
- [NEXT_STEPS_MASTER.md](NEXT_STEPS_MASTER.md) — master list and phases
- [NEXT_STEPS_FOR_YOU.md](NEXT_STEPS_FOR_YOU.md) — your next actions
- [NEXT_STEPS_OPERATOR.md](NEXT_STEPS_OPERATOR.md) — operator runbook
- [TODO_TASK_LIST_MASTER.md](TODO_TASK_LIST_MASTER.md) — fixes, gas, verification, 1–139 index
- [INDONESIA_PACKAGE_4_995_EVIDENCE_STANDARD.md](../04-configuration/mifos-omnl-central-bank/INDONESIA_PACKAGE_4_995_EVIDENCE_STANDARD.md) — HYBX-BATCH-001 4.995 criteria; [scripts/omnl/README.md](../../scripts/omnl/README.md) — snapshot, zip build, strict check
- [RECOMMENDED_COMPLETION_CHECKLIST.md](../07-ccip/RECOMMENDED_COMPLETION_CHECKLIST.md) — CCIP/mapper checklist